<table id="lfcd8"><noscript id="lfcd8"></noscript></table>
  1. In order to view this object you need Flash Player 9+ support!

    Get Adobe Flash player

    Non Asbestos Gaskets  

    Non Asbestos GasketsA gasket is a compressible material, or a combination of materials, which when clamped between two stationary members prevents the passage of the fluid across these members. To prevent passage of fluid, the gasket must be able to flow into (and fill) any irregularities in the mating surfaces being sealed, while at the same time be sufficiently resilient to resist extrusion and creep under operating conditions. The seal is effected by the action of force upon the gasket surface (usually by bolts), which compresses the gasket, causing it to flow into any surface imperfections

     

    Gasket Materials
    Wide varieties of materials are used in the manufacture of gaskets. This section is aimed at providing a brief overview of the common materials. For simplicity they are divided into 4 parts.
    ? Elastomeric materials
    ? Fibrous materials
    ? Other materials
    ? Metallic materials

     

    Non asbestos and asbestos gaskets sheets
    CAF/Non Asbestos Gaskets are die cut or circle cut from compressed asbestos fibre/non asbestos jointings which are manufactured from carefully selected chrysolite fibre intimately blended with suitable heat resistant binders etc. and vulcanised into sheets of homogenous compositions and uniform thickness. CAF/Non Asbestos cut gasket seal is affected by yielding or flow of material into the imperfections of joint contact faces. In this way gasket provides an unbroken barrier of homogenous structure through which no pathway exist for escape of confined media.

     

    Non Asbestos (NAG)


    Style 5000Style 5000 NAG is Aramid fiber, mineral fiber with NBR binder Suitable for oil resistant gasket material for medium to higher loading, good resistance to water and gases, oils & fuels. A standard sealing material used in compressors, pipelines, apparatus, transmission, gas meters and gas meters and internal combustion engines.

    Material Composition : Aramid Fiber, Mineral Fibre.
    Binders : NBR
    Colour : blue
    Max. Continuous Temp : 250°C
    Max.Continuous Temp.with steam : 220°C
    Max. Operating Pressure : 100 bar

    Available sizes
    Thickness : from 0.30mm to 6mm
    Standard Sizes : 1500x1500, 1500x3000, 1500x4000, 2000x3000*
    *Other sheet sizes & thickness upon request

    Style 5100 NAG-S
    Style 5100 NAG-S Gasket material based on Aramid fibre & organic fibre with NBR binder and steel wire reinforced. A premium metallic grade suitale for oils, fuels,lubricants, alcohols, gases, hydrocarbons, steam,water, cooling liquids, most diluted acids and alkalies for medium-high stress conditions.


    Material Composition : Aramid Fiber.
    Binders : NBR and steel wire reinforced.
    Colour : blue
    Max. Continuous Temp : 250°C
    Max.Continuous Temp.with steam : 220°C
    Max. Operating Pressure : 120 bar

    Standard Sizes:
    Thickness: from 0.3mm to 6mm
    Sheet sizes: 1500x1500, 1500x3000, 1500x4000, 2000x3000*
    *Other sheet sizes & thickness upon request


    5200-NAG-FG (Food grade) certain chemicals have been kept at a minimum level, the excess of which 5200 NAG FGmight affect the media. It contains a high amount of mineral fibre which is bio-soluble & thus do not pose any health hazard. Therefore NAM 31 may be used for food grade/drug application. It does not contain any material which might contribute to bacterial or fungal growth. However, we stand no guarantee of contamination & are not liable for any consequences arising there off.

    Material Composition : Aramid Fiber, Mineral Fibre.
    Binders : NBR Elastomers
    colour : red
    Max.Peak Temp : 400°C
    Max. Continuous Temp : 270°C
    Max.Continuous Temp.with steam : 240°C
    Max. Operating Pressure : 100 bar
    Standard Sizes:
    Thickness: from 0.3mm to 6mm
    Sheet sizes: 1500x1500, 1500x3000, 1500x4000, 2000x3000*
    *Other sheet sizes & thickness upon request



    Style 5300 NAG is suitable for high performance, oil resistant gasket material with excellent thermal, 5300 NAGchemical & mechanical properties. Suitable for compressors, pipelines, apparatus, transmission, gas meters and internal combustion engines, pipe unions & pumps etc.

    Material Composition : Aramid Fiber, Mineral Fibre.
    Binders : NBR
    Colour : green
    Max.Peak Temp : 400°C
    Max. Continuous Temp : 270°C
    Max.Continuous Temp.with steam : 240°C
    Max. Operating Pressure : 150 bar
    Standard Sizes:
    Thickness: from 0.3mm to 6mm
    Sheet sizes: 1500x1500, 1500x3000, 1500x4000, 2000x3000*
    *Other sheet sizes & thickness upon request



    Style 5310 NAG Gasket material for various highly aggressive media and very good chemical resistance Style 5310 NAGto acid & alkaline media.

    Material Composition : Aramid Fiber
    Binders : CSM Elastomers
    Colour : gray
    Max.Peak Temp : 400°C
    Max. Continuous Temp : 270°C
    Max.Continuous Temp.with steam : 240°C
    Max. Operating Pressure : 150 bar
    Standard Sizes:
    Thickness: from 0.3mm to 6mm
    Sheet sizes: 1500x1500, 1500x3000, 1500x4000, 2000x3000*
    *Other sheet sizes & thickness upon request


    Style 5400 NAG Gasket material with controlled swell properties in oil, wide range of application in Style 5400automotive and chemical industry. Suitable to seal off hydraulic,engines,transmission and refrigerating oils as well as other hydrocarbons. Also applicable for joints with low sealing pressure like housing, valve covers oil pans etc.

    Material Composition : Aramid Fiber, Mineral Fibre.
    Binders : SBR
    Colour : yellow
    Max.Peak Temp : 400°C
    Max. Continuous Temp : 270°C
    Max.Continuous Temp.with steam : 240°C
    Max. Operating Pressure : 150 bar
    Standard Sizes:
    Thickness: from 0.3mm to 6mm
    Sheet sizes: 1500x1500, 1500x3000, 1500x4000, 2000x3000*
    *Other sheet sizes & thickness upon request

    Style 5500 NAG Suitable for water, oil resistant gasket material for light to medium loading. Suitable Style 5500 NAGfor low operating pressure, e.g. transformers, compressors and apparatus. Also used for easily deformable components with low surface pressure like valve covers and pans in internal combustion engines.
    Material Composition : Made from Aramid Fibre,Mineral Fiber &NBR.
    Binders : NBR
    Colour :red
    Max.Peak Temp : 300°C
    Max. Continuous Temp : 220°C
    Max.Continuous Temp.with steam : 160°C
    Max. Operating Pressure : 80 bar
    Standard Sizes:
    Thickness: from 0.3mm to 6mm
    Sheet sizes: 1500x1500, 1500x3000, 1500x4000, 2000x3000*
    *Other sheet sizes & thickness upon request


     Style 5510 NAG-S Suitable for oil resistant gasket material for light to medium loading. Suitable for Style 5510 NAG-Slow operating pressure, e.g. transformers, compressors and apparatus. Also used for easily deformable components with low surface pressure like valve covers and pans in internal combustion engines.


    Material Composition : Aramid Fiber
    colour : red
    Binders : NBR
    Max.Peak Temp : 400°C
    Max. Continuous Temp : 300°C
    Max.Continuous Temp.with steam : 280°C
    Max. Operating Pressure : 150 bar



     Style 5600_NAG Water/Oil resistant gasket material for light loading. Suitable for low operating Style 5600 NAGpressure, e.g. transformers, compressors and apparatus. Also used for easily deformable components with low surface pressure like valve covers and pans in internal combustion engines.
    Material Composition : Mineral Fibre,High Quality NBR&Organic Fibre.
    Binders : NBR
    Colour : green
    Max.Peak Temp : 250°C
    Max. Continuous Temp : 180°C
    Max.Continuous Temp.with steam : 120°C
    Max. Operating Pressure : 50 bar


    Style 5610NAG-S Water/oil resistant gasket material for light loading. Suitable for low operating Style 5610 NAG-Spressure, e.g. transformers, compressors and apparatus. Also used for easily deformable components with low surface pressure like valve covers and pans in internal combustion engines.

    Material Composition from Aramid Fiber,Organic Fibre with Metal Gauge Centre.
    Binders : NBR
    colour : green
    Max.Peak Temp : 250°C
    Max. Continuous Temp : 180°C
    Max.Continuous Temp.with steam : 120°C
    Max. Operating Pressure : 70 bar


     Style 5700 NAG An excellent material for high stress condition. It offers a high media resistance to Style 5700many of the aggressive media. It exhibits good sealing and torque retention properties. It is specifically designed to satisfy the growing demand for numerous aggressive chemicals used by industry today.It can also be used for sealing oils, fuels, gases, freons, and general application in paper & pulp industry for application in pipelines, radiators, boilers and many other instances of flanged joints.

    Material Composition : Aramid Fiber, Glass Fibre.
    Binders : NBR
    Colour : blue
    Max.Peak Temp : 400°C
    Max. Continuous Temp : 270°C
    Max.Continuous Temp.with steam : 240°C
    Max. Operating Pressure : 100 bar


    Style 5800 NAG It has excellent resistance to steam and strong alkaline media. It is widely used in the Style 5800chemical and petrochemical industries. CF exhibits good sealing and torque retention properties. It is specifically designed to satisfy the growing demand for numerous aggressive chemicals used by industry today. CF can also be used for sealing oils, fuels, gases, freons, and general application in paper & pulp industry for application in pipelines, radiators, boilers and many other instances of flanged joints.
    Material Composition : Aramid Fiber, Carbon Fibre.
    Binders : NBR
    colour : black
    Max.Peak Temp : 400°C
    Max. Continuous Temp : 300°C
    Max.Continuous Temp.with steam : 280°C
    Max. Operating Pressure : 150 bar


    Contact Info
    world map

    BJSEAL ENGINEERING PVT. LTD.


    BR1-350, JAI GANESH VISION
    AKURDI, PUNE - 411035
    MAHARASHTRA, INDIA.


    Phone :+91-20-27483060

    Fax :+91-20-27487080


    Email :
    sales@bjseal.com
     
    Quality
     We are maintains ongoing quality assurance checks throughout the manufacturing process.
    Read More....

    News
    BJSEAL is at the forefront of the engineering business and regularly produces press releases we offer to our customers.
    Read More....
    捕鱼赚钱的游戏