<table id="lfcd8"><noscript id="lfcd8"></noscript></table>
  1. In order to view this object you need Flash Player 9+ support!

    Get Adobe Flash player

    Rubber gasket sheet 

    Rubber sheeting is required to perform over a wide range of applications and conditions. The following information can be used as a guide to select the correct rubber sheet for your application. Two surface finishes of rubber sheet are available as standard; “Plate”, giving a smooth gloss finish or “Cloth” where an impression of fabric is imparted onto the rubber during manufacture. A Self Adhesive Backing can be added to all rubbers if requested. Other than specified sizes are on request*

    BJSEAL Style 2000 NITRILE Rubber rubber gasket Sheet
    A high grade Nitrile material at 70NITRILE RUBBER GASKETshore, resistant to many hydrocarbons, fats, oils, greases, hydraulic fluids and chemicals. Cloth reinforcement enhances dimensional stability in flanged gasket applications with high compression loads. Suitable for use in air, hot water, saturated steam, low pressure steam and hydraulic services.
    Style 2010 Nitrile with cloth inserted
    Style 2020 Nitrile with nylon inserted


    Colour : Black
    Thickness (mm) :1.0mm to 12.0mm*
    Sheet Size : 1.5m wide in 10m rolls*
    Finish : Plate Finish
    Density (Specific Gravity) : 1.4
    Hardness (degree Shore A) : 70 ± 5°
    Tensile Strength (Mpa) : 6
    Elongation at Break : 300%
    Temperature Range Max. : -20°C to +100°C
    Abrasion Resistance (mm3) : 300
    Tear Resistance (kg/cm) : 14

    BJSEAL Style 2100 VITON rubber gasket Sheet Viton is a high grade fully synthetic VITON Rubberfluoroelastomer which has excellent resistance to heat and a wide range of aggressive fuels and chemicals. It also has good resistance to weathering and ozone. Viton is available in a range of different grades for a variety of applications. Viton? rubber sheeting is designed for use in extreme conditions, excellent resistance to chlorinated hydrocarbons, fuels and many acids. Not generally used with ketones, low molecular weight esters and nitro containing compounds
    Style 2110 Viton with cloth inserted
    Style 2120 Viton with nylon inserted

    Colour : Black
    Thickness (mm) :1.0mm to 10.0mm*
    Sheet Size* : 1.5m wide in 10m rolls*
    Finish : Plate Finish
    Density (Specific Gravity)g/cm3 : 1.99
    Hardness (degree Shore A) : 72 ± 5°
    Tensile Strength (Mpa) : 4
    Elongation at Break : 165%
    Temperature Range Max. : 10°C to +315°C
    Viton? is the registered trademark of DuPont Performance elastomers.

    BJSEAL Style 2200 EPDM rubber gasket Sheet EPDM (Ethylene Propylene)
    is used widely in the EPDM rubberwater industry and is suitable for use with potable water applications offering good in ozone and water resistance. Chemical and ageing characteristics make this rubber ideal for exposed applications.


    Colour : Black
    Thickness (mm) :1.0mm to 12.0mm*
    Sheet Size : 1.5m wide in 10m rolls*
    Finish : Plate Finish
    Density (Specific Gravity) : 1.25
    Hardness (degree Shore A) : 60 ± 5°
    Tensile Strength (Mpa) : 5
    Elongation at Break : 300%
    Temperature Range Max. : -30°C to +100°C
    Abrasion Resistance (mm3) : 190
    Tear Resistance (kg/cm) : 10


    BJSEAL Style 2300 NEOPRENE rubber gasket Sheet Neoprene Rubber Sheeting is 70° shore Neoprene Rubberhardness Commercial Quality Chloroprene (Neoprene) and Styrene Butadiene blended material. Neoprene Rubber is a black chloroprene rubber with good weathering and heat resistance. Neoprenes have moderate resistance to petroleum based fluids. Cloth reinforcement enhances dimensional stability in flanged gasket applications with high compression loads. Suitable for use in air, hot water, saturated steam, low pressure steam and hydraulic services.
    Style 2310 Neoprene with cloth inserted
    Style 2320 Neoprene with nylon inserted
    Style 2330 Neoprene diaphragm sheet

    Colour : Black
    Thickness (mm) :1.0mm to 12.0mm*
    Sheet Size : 1.5m wide in 10m rolls*
    Finish : Plate Finish
    Density (Specific Gravity) : 1.4
    Hardness (degree Shore A) : 70 ± 5°
    Tensile Strength (Mpa) : 4
    Elongation at Break : 250%
    Temperature Range Max. : -20°C to +100°C
    Abrasion Resistance (mm3) : 250
    Tear Resistance (kg/cm) : 7

    BJSEAL Style 2400 SILICONE rubber gasket Sheet Silicone Rubber Sheeting is an extremely Sillicon Rubberresilient, totally synthetic rubber available in a wide range of colours and hardness’s. Silicone displays excellent resistance to heat, weathering, ozone and a wide range of chemicals. It is impervious to UV light, is non toxic, chemically inert and will retain its flexibility and properties over a wide temperature range. colours Available include white, translucent and red.

    Colour : Black
    Thickness (mm) :1.0mm to 12.0mm*
    Sheet Size : 1.5m wide in 10m rolls*
    Finish : Plate Finish
    Density (Specific Gravity) : 1.25
    Hardness (degree Shore A) : 60 ± 5°
    Tensile Strength (Mpa) : 5
    Elongation at Break : 300%
    Temperature Range Max. : -30°C to +100°C
    Abrasion Resistance (mm3) : 190
    Tear Resistance (kg/cm) : 10

    BJSEAL Style 2500_SBR Rubber Gasket Sheet(Styrene-butadiene rubber) A polymer used in the 2500 SBRSBRmanufacture of expanded rubber. It is very economical and possesses no unique chemical resistance properties. SBR rubber can be compounded to provide very fine abrasion, wear, and tensile qualities. SBR can be readily substituted for natural rubber in many applications with significant cost savings. Resilience is about the same as natural rubber. Cloth reinforcement enhances dimensional stability in flanged gasket applications with high compression loads. Suitable for use in air, hot water, saturated steam, low pressure steam and hydraulic services.

    Colour : Black,Red
    Thickness (mm) :1.0mm to 12.0mm*
    Sheet Size : 1.5m wide in 10m rolls*
    Finish : Plate Finish
    Density (Specific Gravity) : 1.25
    Hardness (degree Shore A) : 70 ± 5°
    Tensile Strength (Mpa) : 3.2
    Elongation at Break : 200%
    Temperature Range Max. : -55°C to +90°C
    Abrasion Resistance (mm3) : 100
    Tear Resistance (kg/cm) : 40


    Contact Info
    world map

    BJSEAL ENGINEERING PVT. LTD.


    BR1-350, JAI GANESH VISION
    AKURDI, PUNE - 411035
    MAHARASHTRA, INDIA.


    Phone :+91-20-27483060

    Fax :+91-20-27487080


    Email :
    sales@bjseal.com
     
    Quality
     We are maintains ongoing quality assurance checks throughout the manufacturing process.
    Read More....

    News
    BJSEAL is at the forefront of the engineering business and regularly produces press releases we offer to our customers.
    Read More....
    捕鱼赚钱的游戏